Kitchen Design Studio by Kitchen Design NYC.  
Independent Kitchen Design & Planning Studio

Yes. In New York City, removing a load-bearing wall requires plans prepared by a New York State licensed Registered Architect or Professional Engineer and Department of Buildings (DOB) approval. Work may not begin until permits are issued.

Answer by Kitchen Design NYC. Independent kitchen design studio in New York City.

Definition: The DOB classifies any wall that supports any vertical load in addition to its own weight as a load bearing wall. Also see: C26-23.0 Bearing Wall.

If your kitchen renovation includes removing or opening walls, the first step is to evaluate the wall’s structural purpose and understand what’s feasible within your space. Any modification to a load-bearing wall requires formal filings and DOB permits prepared by a licensed professional. Doing so without proper filings can compromise safety and result in violations.

In practice, your architect or structural engineer prepares the structural drawings for approval. As the kitchen designer on your team, Kitchen Design NYC develops the layout first so the architect can integrate it into the structural filing. The right sequence is:

1. Define your desired kitchen layout with your kitchen designer.

2. The architect then adapts the structural drawings and handles DOB filings around that vision.

3. The contractor executes construction only after permits are approved.

This coordination ensures your design intent leads the structural plan, creating a seamless process from concept to construction.

If you’re unsure whether your wall is load-bearing or what’s possible within your layout, schedule a clarity call. You’ll gain professional insight into your space and understand how to structure your design and permitting process before committing to construction.

A complete NYC kitchen renovation typically takes 7 to 9 months from the start of the design phase to final installation. This includes design development, board or DOB approvals, cabinet lead times, and construction. Timelines vary based on scope, materials, and building access requirements.

Answer by Kitchen Design NYC. Independent kitchen design studio in New York City.

High-rise apartments and co-ops add extra layers of coordination. Elevator bookings, debris removal schedules, and noise restrictions all influence timing. Most high-end renovations cannot be designed, approved, and executed in just a few weeks. Each phase builds on the last, and top contractors and fabricators book months in advance.

Kitchen Design NYC helps clients reverse plan each stage so work flows efficiently: design and approvals first, cabinetry ordered second, then construction and site preparation timed to delivery and installation. This sequencing keeps the schedule consistent and creates a smooth, predictable process.

Typical Lead Times:

• Design & Planning: 4–8 weeks

• Approvals & Permits: 2–6 weeks

• Cabinetry Production: 3–6 months

• Construction: 3–6 weeks

• Installation & Finishing: 4–6 weeks
  

Why Early Planning Matters: Starting early gives you more flexibility, more accurate quotes, and access to the contractors and materials you truly want. It also lets you make decisions confidently, not under pressure, and ensures your renovation progresses with clarity and calm from start to finish.

If you’re considering a kitchen renovation, allow yourself time to plan it thoughtfully. Starting early means every decision supports your goals and budget. Let’s talk about your project and outline what a realistic timeline could look like for your specific space.

Yes. If your scope includes moving or adding plumbing, gas, ventilation, electrical, or any structural work in New York City, you need permits from the NYC Department of Buildings (DOB) pulled by licensed professionals. Cosmetic updates such as cabinet or countertop replacements and paint typically do not require DOB permits, although many buildings still require board approval.

Answer by Kitchen Design NYC. Independent kitchen design studio in New York City.

Also searched as: kitchen permit NYC; do I need a permit to remodel my kitchen in NYC; NYC kitchen renovation permits.

As part of board approvals, Kitchen Design NYC reviews your building’s Alteration Agreement when preparing the submission package. It spells out what the building requires in addition to NYC rules. Based on that document and your defined scope, the licensed architect or engineer prepares any required drawings, and the general contractor and licensed trades pull permits in line with city and building guidelines. During our on-site walkthrough with the general contractor, we confirm feasibility against the proposed plan so every detail is clear and your quotes and filings match the actual scope.

Helpful reference points (at a glance):

• Typically requires DOB permits: plumbing or gas changes, new or relocated electrical circuits or panels, ventilation/ducting changes, structural work, new wet locations.

• Typically does not require DOB permits: cabinet, countertop, appliance-in-place swaps, surfaces, lighting fixture swaps on existing circuits (confirm building rules).

If you’re planning a remodel, schedule a clarity call. We’ll discuss your renovation goals and layout priorities, and I’ll explain how our design process guides you from concept through planning and coordination with your project team.

Board approvals in NYC typically take 2 to 6 weeks, depending on management responsiveness, project complexity, and the review process. No construction or cabinet orders can begin until written approval is received.

Answered by Kitchen Design NYC.

Independent kitchen design studio in New York City.

At Kitchen Design NYC, we prepare the Alteration Agreement package in collaboration with the general contractor so the first submission is complete and coordinated. Each building sets its own requirements, such as architectural drawings, insurance certificates, contractor licenses, and scope descriptions.

After submission, the building’s architect or management team reviews the plans and may return questions or request clarifications. We handle these together with your contractor. For more complex scopes, stamped architectural drawings may be required. This organized process keeps approvals moving and lets construction begin smoothly once authorization is granted.

If you’re planning a kitchen renovation in a co-op or condo, schedule a clarity call. We’ll discuss your goals and outline how our design process supports you from concept through board approvals, permitting, and final installation, so every step is managed with clarity and precision.

Updated October 2025

Most NYC kitchen renovations require Limited Alteration Applications (LAA) for plumbing, electrical permits for new circuits or lighting, and sometimes general construction permits. Larger projects that change layouts, walls, or mechanical systems may require an ALT-2 or ALT-1 filing submitted by a licensed architect.

Answered by Kitchen Design NYC.

Independent kitchen design studio in New York City.

Definitions:

• LAA: Basic work permits. Used for limited plumbing work, fire-suppression piping repair or replacement, and certain oil-burner work that does not include construction work. Generally for repair or replacement on existing systems.

• Project Permits:

  • ALT-1: Interior kitchen renovation within the same apartment that keeps the unit’s use and occupancy the same. This can include new layouts, walls, plumbing, electrical, ventilation, and finishes when coordinated under one application.

  • ALT-2: Scopes that change use, egress, or occupancy. Examples include combining two apartments into one, subdividing one apartment into two, adding a mezzanine that changes egress, or any work that otherwise requires a new or amended Certificate of Occupancy. -> Once ALT-1 or ALT-2 is approved the Work permits follow: GC permit for partitions and finishes, plumbing permit for supply and waste relocation, electrical permit for new circuits or panel work, and mechanical if ducted ventilation changes.

• Work Permits:

  • Electrical Permit: Required for most electrical work, including handling wiring in homes or businesses. Issued to NYC-licensed master or special electricians via DOB NOW.

  • General Construction Work Permit: A building construction permit issued to a NYC-licensed General Contractor for renovation work; covers items like partitions and other general construction activities.

  • Plumbing Permits: Used for installation, maintenance, repair, modification, extension or alteration of any waste, domestic water, gas piping, or fire standpipes in any building or piping system.

Each permit type covers a specific trade or scope, and coordination among them is essential. At Kitchen Design NYC, we work with your architect, expediter, and licensed contractors so Department of Buildings filings match the approved kitchen design. This alignment keeps inspections straightforward and helps construction proceed smoothly and compliantly from start to finish.

If you’re planning a renovation, schedule a clarity call. We’ll discuss your design goals and outline how our process integrates design development, technical coordination, and permit readiness, so your project moves forward efficiently and without surprises.

Yes, if you want your kitchen to function beautifully and fit your lifestyle. Contractors build, architects design the structure, and interior designers create cohesion. A kitchen designer bridges them all, translating how you live into a detailed, build-ready plan that makes the renovation efficient, coordinated, and stress-free.

Answered by Kitchen Design NYC.

Independent kitchen design studio in New York City.

We do not replace your architect or contractor. We complete the picture. At Kitchen Design NYC, our role is to make sure your kitchen works beautifully and lives well, from layout to lighting, from the first sketch to final installation. Here is how we fit into your expert renovation team:

✔️ Layout planning that fits your life Optimized flow, function, and storage tailored to your daily routines.

✔️ Appliance and cabinetry integration Precise coordination so every element aligns cleanly and performs flawlessly — no surprises during installation.

✔️ Lighting design with intention Task, ambient, and accent layers designed to enhance how you use the space every day.

✔️ Build-ready plans your contractor can trust Clear, coordinated documentation that reduces errors, delays, and unnecessary costs.

✔️ Materials and finishes that serve both form and function Selections matched to your aesthetic, lifestyle, and long-term goals.

Working with a dedicated kitchen designer means your contractor builds from clarity, your architect designs within real-world constraints, and your interior designer can focus on the bigger picture knowing the kitchen is fully resolved.

If you already have a contractor or architect, I can join your team as the kitchen design lead. Book a clarity call to see how our design process integrates seamlessly with your existing team and ensures every detail comes together beautifully.

Independent kitchen designers focus on design expertise, transparent planning, and product freedom. Design-build firms manage both design and construction under one roof. Your choice depends on whether you value unbiased design, specialized kitchen expertise, and control, or prefer a single-source turnkey approach.

Answered by Kitchen Design NYC.

Independent kitchen design studio in New York City.

Because Kitchen Design NYC works independently, I am not tied to any single cabinetry line or contractor. I collaborate with a trusted network of suppliers and licensed professionals to deliver a process built around you, not a catalog or preset package. With nearly two decades of international experience in high-end kitchen design and project management, I bring creative vision and technical precision to every project. What Sets Kitchen Design NYC Apart:

🧩 Independent Expertise Because we’re not tied to one showroom, brand, or contractor, every design begins with your needs, not product constraints. You gain creative freedom, transparent pricing, and access to the best resources for your specific project.

🧠 Integrated Planning We connect the dots between design vision, building logistics, and technical execution. From cabinetry layouts to appliance integration and lighting coordination, every decision is mapped to fit your renovation seamlessly.

💡 Design-First Approach Your kitchen isn’t treated as a construction task, it’s planned as an experience. The layout, flow, and details are refined first, so when your contractor starts, every step is clear and aligned.

💬 Personalized Guidance You work directly with an experienced designer who manages the process from concept through completion. The result is a renovation that feels effortless, and a kitchen that reflects how you truly live.

If you’re deciding between a design-build firm and an independent designer, schedule a clarity call. We’ll review your renovation goals and discuss which approach best supports your timeline, control, and design vision.

Independent kitchen designers work outside cabinet showrooms and provide unbiased planning and material guidance. Fees are professional and comparable to architects and interior designers.

Answered by Kitchen Design NYC.

Independent kitchen design studio in New York City.

At Kitchen Design NYC, we provide concierge-level design that connects architects, contractors, and suppliers into one coordinated plan. Because we are independent, you are not limited to a single cabinet brand or sales package. You get a design that fits your space, your routines, and your goals, then documentation your contractor can build from with clarity.

Areas we serve in New York City

Manhattan, Brooklyn, and Queens, including neighborhoods such as Upper East Side, Upper West Side, Tribeca, SoHo, Brooklyn Heights, Williamsburg, and Park Slope. We also support projects in the Hamptons and Greenwich, CT.

Our three-step approach:

1. Design discovery and layout concept Define goals, priorities, and a layout that supports how you live.

2. Design development and documentation Specify cabinetry, appliances, lighting, and finishes, then prepare clear plans and schedules.

3. Coordination through quotations, ordering, and execution Align suppliers and the project team so delivery, site preparation, and installation work smoothly.

Also searched as: best kitchen designer NYC, independent kitchen designer NYC, kitchen designer near me.

If you would like to explore this model, book a clarity call. We will discuss your goals, explain how our process supports you from concept to installation, and outline the right first step for your project.